Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
div
idadc-toc

Table of Contents

General Calendar Instructions

Logging into the calendar

...

Scheduling & Facilities Tab

Image Removed

The Scheduling & Facilities tab is where you can book a facility or facilities for your event date(s). If you are not the Space Manager (owner) of the facility or facilities, a facility request will be sent to the Space Manager of the requested facility after you finalize your event. Your event will not be published in the calendar until the Space Manager approves your facility request.  

For more information regarding this workflow, please visit the Active Data Calendar Space Reservation Workflow guide.

Image Added

  1. You will see three options at the top when on the Scheduling & Facilities page. Only the first two options are relevant.

    1. Select Event Date(s) - (No Facility Required) - Pick this option if your event does not have a room.
    2. Select Event Date(s) to find available Facilities - Pick this option if you want a room for your event.

      NOTE: Classrooms included in the calendar do not currently include academic class schedules so availability information will not be accurate. Availability of classrooms can be confirmed by the Office of the Registrar.
       
  2. If you filled out the You will see three options at the top when on the Scheduling & Facilities page.
  3. Select Event Date(s) - (No Facility Required) - Pick this option if your event does not have a room.
  4. Select Event Date(s) to find available Facilities - Pick this option if your event has a room.
    IMPORTANT - Please note that many of the rooms are not set up with schedules so the use of the availability data will not be 100% accurate. If you are planning to select a room for your event that is not "owned" by your unit, please be sure to verify availability and obtain permission from the room owner prior to selection
     
    Select Facility to find available Date(s) - Pick this option if you do not have an event date in mind and wish to see the availability of a room. 
    IMPORTANT - Please note that many of the rooms are not set up with schedules so the use of the availability data will not be 100% accurate. If you are planning to select a room for your event that is not "owned" by your unit, please be sure to verify availability and obtain permission from the room owner prior to selection. 
     
    If you filled out the event date, start time, and duration on the "Main Information" tab, you will find it populated on the screen here. If you did not, fill it out the Start Date / End Date fields and the Start and End times under "Event Time(s)".
    1. If you have multiple dates for your event, you may click "Custom Schedule" to pick out the dates your events fall upon. In the image below, we select March 26, 29, and the 30th.

  5. After you've selected a facility option and start/end dates, click "Generate Schedule". You will now see a list of your event date(s) and time(s) under "Current Schedule". You may correct the start/end date(s) and time(s) here if necessary.
    Image Removed  

    Image Added
    1. If you would like the event to only be displayed during a certain date range, visible after a certain date, or
    If you would like the event to only be displayed during a certain date range, visible after a certain date, or
    1. hidden from the calendar after a certain date, fill out the following section that will be displayed after clicking "Generate Schedule":

      Image Modified
       
  6. Please read the appropriate section below depending upon the facility option you've selected.

...

  1. You will now see a list of your event date(s) and time(s) under "Current Schedule". You may correct the start/end date(s) and time(s) here if necessary.

    Image Added 

  2. Please read the appropriate section below depending upon the facility option you've selected.

Select Event Date(s) - (No Facility Required) Option Selected - You do not need a room for your event

  1. If you've picked "Select Event Date(s) - (No Facility Required)", you can proceed to the "Details & Registration" tab to finalize your event details.

Select Event Date(s) to find available Facilities Option Selected - You want a room for your event

  1. If you've picked "Select Event Date(s) to find available Facilities", check off the event date(s) you wish to book a room for under "Current Schedule". Note that you may only book the same set of rooms for the selected dates so if you have three dates in three different rooms, you will go through this process three times.
    Image Removed
    Image Added

  2. Once you've selected your event date(s), scroll down and you will see the facility search "Facility Search" area and some other options (room type, features, setup). Ignore these other options and select a room as you would've in the previously in the Calendar service. 
    Image Removed
    Once you've selected a room, click "Search". You will then see a new area called "Available Room(s)". Click the checkbox under "Select" for the room and click "Save".
    Image Removed
    IMPORTANT - If you receive an error after searching the room that states, "There are no rooms that match your search criteria or can be scheduled for this event." Please make sure that someone has not already entered the event you wish to add into the Calendar system. You can do this by looking at the public calendar http://www.baruch.cuny.edu/calendar for the event date and time. If there is no such event, please make sure you have authorization to use this room. If you do, please contact help desk and we will look into this.
     
    You should see the room now listed in the "Schedule Facility Booking(s)" area. This means the room is now attached to your event and you can proceed to the "Details & Registration" tab to finalize your event. 
    Image Removed
  3. Repeat this process for any other event date(s) that may need a room.
  4. To confirm that all event date(s) have rooms associated with them, scroll down to the "Schedule Facility Booking(s)" area. If you see a tab labeled "Unbooked", the number in the parentheses indicates how many event dates do not have a room. If you hover over this tab, it will display the event date that does not have a room.
    Image Removed
  5. Once you've confirmed that your event date(s) are properly booked, proceed to the "Details & Registration" tab to finalize your event details.

Select Facility to find available Date(s) Option Selected

If you've picked "Select Facility to find available Date(s)", you do not have an event date set for your event. This option will allow you to see which rooms are open at different dates and times. 

Image Removed

Only the following search options are applicable at the moment:

  • The facility(s) area allows you to search against the room schedules for one or more specific rooms or buildings. If "Newman Vertical Campus" is selected, you will see room schedules for all rooms listed in the calendar that are in the Newman Vertical Campus. If a specific room is selected such as "Room 3-216" under the Newman Vertical Campus, you will only see the room schedule for that particular room.
  • "Search for Date" will allow you to see the room schedules for the facility(s) specified for the specific dates specified here. If a room is not open on the dates specified, it will not show up in the search.
  • "Search for Time Slot" will allow you to see the room schedules for the facility(s) specified for the time slots specified here. If a room does not have an opening with the time slot specified, it will not show up in the search.
Once you've put in your choices, click "Search".
You will now see an area labeled "Available Facility(s)". If the room you wish to book has all white cells, that means the room is free. The other colors are explained by the legend in the "Available Facility(s)" area.

...

 
 

Details & Registration Tab

...

  1. You can either type in a particular facility you wish to reserve in the Location Keyword Search ("14-250") and click "Filter Facility Checklist" or check off the rooms you wish to search and then click the blue "Search" button.

    If you are not sure which room you wish to book, you can check off "Baruch College" and click the blue "Search" button to see a full list of all rooms available.

    Image Added

  2. Once you've selected a room, click "Search". You will then see a new area called "Available Room(s)". Click the checkbox under "Select" for the room and click "Save".

    Some rooms may have setup options that describe how you wish for the room to be arranged. Some rooms may also have setup and tear down times. If the room is a Conference Services owned room, please do not modify these times. For non Conference Services owned rooms, the setup time is how much earlier you need to be in the room to prepare and the tear down is how much later you need to be in the room to clean up.

    Image Added

    IMPORTANT - If you receive an error after searching the room that states, "There are no rooms that match your search criteria or can be scheduled for this event.", this means that the room is not available for your request event date and time. You will have to search for another room.
     
  3. You should see the room now listed in the "Schedule Facility Booking(s)" area. This means the room is now attached to your event and you can proceed to the "Details & Registration" tab to finalize your event. 

    You can also remove a room in this area by clicking the tab with the room name you wish to remove and then clicking "RESET".

    Image Added

  4. Repeat this process for any other event date(s) that may need a room.
     
  5. To confirm that all event date(s) have rooms associated with them, scroll down to the "Schedule Facility Booking(s)" area. If you see a tab labeled "Unbooked", the number in the parentheses indicates how many event dates do not have a room. If you click this tab, it will display the event date that does not have a room.

     

    Image Added

  6. Once you've confirmed that your event date(s) are properly booked, proceed to the "Details & Registration" tab to finalize your event details.

Details & Registration Tab

Image Added 

  1. Fill out the contact information. For the other boxes under "Other Event Information", check them off if it is appropriate for your event. For example, if it is a school or department event, check off the school or department that is holding it. If you do not find your school or department in the list, please send a request to the BCTC Help Desk to have this added.
  2. If you would like your event listed in the CUNY Calendar (http://events.cuny.edu/ ), select "Yes. Make this event visible in the CUNY Calendar" for the "Promote in CUNY Calendar" box, otherwise select "No. Do not make this event visible in the CUNY Calendar".

    If your event is in a private category or "Select", select "No. Do not make this event visible in the CUNY Calendar" as private events and select events are not published to the CUNY calendar. 
  3. If attendees will be charged for your event, check "Yes", otherwise "No".
  4. For the "Rate Category", please see below:
    1. If your Dean/VP has not given you a rate category, you should set it to "TBD by Dean or VP". 

      As part of the Space Policy, you must get a rate category from your Dean/VP. You must save the event afterwards and send your event information to the Dean/VP. 
       
    2. If your Dean/VP has given you a rate category for your event, you should set it to the rate category they've given you here.

  5. Click "Preview" at the bottom right of the screen.

Preview Screen 

...

On the preview screen you can opt to save the event or release the event.

...

Adding an event to the private calendar (Private calendar users only)

...

Modify/cancel/delete an existing event

...

See below for which option you should select.

  •  The "Save Event" option will not publish your event to the calendar or send a facility request to a Space Manager. An event should be saved when you have not received the rate category from your Dean/VP yet (Any rate category other than "TBD by Dean or VP") or if you are missing event information and wish to fill it in at a later time.

    In order to receive a rate category from your Dean/VP, you must send them the event information by following the instructions further below.
     
  •  The "Release Event" option will send a facility request to the Space Manager (if there is a facility requested) and publish your event to the calendar (if it's a public/private event). 

    If your event has a rate category of "TBD by Dean or VP" and it is released with a facility request, it will not be approved by the Space Manager. Your Dean/VP will give you a rate category for your event after you send them the event information.  Steps for sending them the event information can be found further below.


See the appropriate section below dependent upon whether or not the rate category was given by the Dean/VP.

Rate Category was received from Dean/VP and set to anything other than "TBD by Dean or VP"

  1. Click "Finish" at the bottom right of the screen if you have a rate category set to anything other than "TBD by Dean or VP". 

    You have now successfully added an event to the calendar and a facility request will be made if you have requested a facility. 

    IMPORTANT - If your event is booked for a facility that you are not the Space Manager of, the event will not be published into the Calendar until the facility request has been approved.

    Image Added

Rate Category has not been received from Dean/VP and is set to "TBD by Dean or VP" 

  1. If you have your rate category set to "TBD by Dean or VP", make sure your event is set to "Save Event" and check off "Go to Event Notification Page". Then click "Finish".

    Image Added

  2.  This will bring you to the "Event Notification" page. On this page, select "Email Includes Internal Notes and Comments Log" and "Third Party Recipients" where you will enter your Dean/VP's email address. Enter "Rate Category Request" for the subject and any additional information into the body of the message then click "Submit". 

    Image Added
     
  3. The following screen will show an overview of the message. Click "Submit" to send the notification to your Dean/VP.

     Image Added
  4. You are done with the event for now. The Dean/VP will send you the rate category through email (Please see the Space Reservation Workflow - Step 3), where you will then modify your event, put in the rate category, and then select "Release Event" and "Finish" in order to make the facility request to the Space Manager.

    If you do not know how to modify your event, see the section below. 

Modify/cancel/delete an existing event

If you wish to modify, cancel, or delete an existing event, you may do so by following these instructions.

  1. In the calendar service, click the "Events" tab
  2. Click "Events: Modify/Cancel/Delete".
  3. Select the event from the left-hand list and click "Submit". You can also double-left click the event you wish to modify. If you do not see the event, use the keyword search on the right if you know the event name.

    Image Added

    Other useful search options:

    Select Events for a Specific Date Range
    - You can specify the start/end date to show events during this time period.
    Save for Current User Login Session - If you expect to modify the same set of events during your current session within the Calendar, saving this will prevent you from having to search for it again for the duration of the session.
    Save for all Future Session - If you expect to use this search again in the future, you can save the search by selecting this option and putting in a name for the search. In the future, you can access the same search by using the drop-down menu by "Select Saved Search".

  4. If you have more than one occurrence in your event (more than one event date), you will see the screen below. You can modify the series or an individual occurrence of the event. When you've selected which set you'd like to modify, click "Submit".

    Image Added
  5. Modifying the event is similar to adding an event. You can proceed through the tabs and make edits where needed. If you wish to delete or cancel an event, you can select these options on the first tab shown in the image below. When you're done with your edits, just click "Preview" and you can save or release the event.

    Image Added

 

Removing a room from an event

 

If you wish to remove a room from an event date, you will click on the "Scheduling & Facilities" tab at the bottom of the page. 

 Image Added

Scroll down to the bottom of the page where you will see the "Schedule Facility Booking(s)" area. Click on the room (the tab) you wish to remove and then click "RESET". The room will then be removed. Make sure to click "Preview" and then "Finish" at the bottom right of the screens to finalize your changes.

Image Added

If you have multiple dates using the room that is being removed, you should modify the occurrence date where the room is not needed and follow the instructions above. You can select an occurrence by following the instructions from the above section "Modify/cancel/delete an existing event"

Changing/Removing Event Date(s) or time for an Event

IMPORTANT - Changing the event date/time for an event date where the room has already been approved will require the Space Manager to approve/deny your request again. The room will be available for others to request until the Space Manager approves your request.

If you wish to change/remove an event date or time for your event, you will click on the "Scheduling & Facilities" tab at the bottom of the page. 

 Image Added

You may make your changes on the "Current Schedule" table. If you need to remove a date, you can click the "Delete" link next to the date. Don't forget to click "Preview" and then "Finish" to finalize your changes.

Image Added

Modifying Events with Registration / Active Registrants

Please follow these instructions if you wish to modify an event that accepts RSVPs on the calendar.

...

Please note that it is not possible to change the event date, start time, or end time when you have people registered for your event. If you only wish to change the time of the event, it is recommended the registrants are emailed with the new time and the new time can be noted in the event description.

...

When you cancel an event, it will give you an option to reschedule the event. Rescheduling the event will allow you to create the event again with all of the information from the previous event already populated.

*If you delete (not cancel) an event with registrants, all of the registration information will be lost.*

...

you to create the event again with all of the information from the previous event already populated.

*If you delete (not cancel) an event with registrants, all of the registration information will be lost.*

Image Added

Space Manager (facility owner) Instructions

Approving or Denying a Facility Request for Space Managers

  1. If you are a Space Manager of a facility, you may receive facility requests for events booked for your facility via email.

    Image Added
  2. To view these facility requests, login to the calendar and click the "Facilities" button on the "Main Menu" page. 

    Image Added
  3. To take action on these facility requests, click on either the "Event Name" link to go into further detail for the event or select "Approve" or "Deny" from the Action drop-down for instant approval/denial.

    Image Added
  4. You should check and verify that a rate category has been set by clicking on the "Event Name" link and then the "Internal" button (highlighted in image below).If the rate category is set to "TBD by Dean or VP" or empty, the request should be denied.

    Image Added
     
  5. If you clicked on the "Event Name" link and then the "Facilities" button (highlighted in image below), you will see an overview of the event with options to approve/deny the event. Check the checkbox underneath "Action" and then click approve or deny to take action on the event.

    Image Added
  6. If you deny an event, you will receive a prompt to indicate the reason for denial. The Event Organizer (submitter of the event) will receive an email with the reason indicated in this window. The facility will also be removed from their event and they will have to initiate a new facility request.

    Image AddedImage Added
  7. If you approve an event, the event will be published into the calendar and the facility will be booked for the event. The Event Organizer will receive a message indicating the request was approved.

    Image AddedImage Added

Facilities Calendar Instructions - Seeing Room Availability

Using the Facilities Calendar to see room availability before adding an event

The Facilities Calendar allows you to see what rooms are available, requested, booked over a series of dates in a gantt chart. 

  1. Click "Facilities Calendar"

    Image Added
  2. Check off the rooms you wish to see information for within the "Event Location" area

    Image Added

  3. Fill in your start/end date parameters
  4. Select your filter option (described below)
    1. Show All Requested Facilities - Shows all facilities selected that have requests that have not yet been approved
    2. Show All Booked Facilities - Shows all facilities selected that have requests that have been approved 
    3. Show All Available Facilities - Shows all facilities selected with availability anywhere on the schedule
    4. Show All Facilities - Shows all facilities selected regardless of availability
  5. Click "Search"
  6. Rooms and their availability will be shown on the bottom of the page.

    Image Added

Registration / RSVP Instructions

Add Registration to an Event

...

  1. Follow steps for "Managing Registrants" above
  2. If you click the link with the number of pending, approved, denied, or cancelled registrants, this will show you a list of registrants with the specified status for that event. This screen is shown below.



  3. To email registrants, either click "Select all" if you wish to email all registrants or click the individual's checkbox under "Email". Click "Submit". The email screen is shown below.

  4. You should see the registrants' emails in the textbox labeled "Third Party Recipients". You may add additional email addresses if you wish.
  5. Fill out the "Message Subject" and the body labeled "Create Custom Email Message". When you're ready to send the email to your registrants, click "Submit". The next screen will show you a preview of your message. You can click "Submit" again to send the email.

Marketing an Event Instructions

Creating a link to a specific event for distribution

...